Site MapHelpFeedbackPractice Test
Practice Test
(See related pages)






1Capacitance is the ability of a dielectric to hold or store a magnetic charge.
A)True
B)False



2A capacitor consists of an insulator between two conductors.
A)True
B)False



3In the electronics industry capacitors are rarely referred to as condensers.
A)True
B)False



4The action of neutralizing the charge by connecting a conducting path across the dielectric is called discharging the capacitor.
A)True
B)False



5Any charge or discharge current flows through the conducting wires to the plates and through the dielectric.
A)True
B)False



6When one coulomb is stored in the dielectric with a potential difference of one volt, the capacitance is one microfarad.
A)True
B)False



7Capacitors are always coded in nF.
A)True
B)False



8The result of a larger plate area is more charge stored for the same applied voltage, which means that the capacitance is larger.
A)True
B)False



9Mica capacitors are often used for small capacitance values of about 10 to 5000 pF.
A)True
B)False



10Trimmer capacitors have values of than 100 pF.



11When two or three capacitor sections of a tuning capacitor are configured on one common shaft, the capacitor sections are said to be .



12A rating that specifies the maximum potential difference that can be applied across the plates without puncturing the dielectric is the rating.



13A good capacitor has a very resistance.



14The unit for capacitance is .



15The action of neutralizing the charge by connecting a conducting path across the dielectric is called .



16Surface-mount capacitors are often called capacitors.



17A capacitor consists of a(n) , also called a dielectric between two conductors.



18Which of the following is not a feature of the tantalum electrolytic capacitor?
A)larger C in a smaller size
B)longer shelf life
C)less leakage current
D)less expensive than aluminum



19When determining the capacitance and tolerance of a mica capacitor, if the tolerance colored dot is gold, what is the tolerance of the capacitor?
A)5%
B)10%
C)1%
D)2%



20When the circuit's total capacitance is equal to the sum of the individual capacitances, the capacitors are connected in
A)series
B)parallel
C)series-parallel
D)series with a resistor



21What piece of test equipment is specifically designed to measure the capacitance value of capacitors?
A)ohmmeter
B)Farad tester
C)capacitance meter
D)reactance meter



22What is the inability of a capacitor to completely discharge to zero?
A)dielectric absorption
B)dielectric diffusion
C)capacitive reactance
D)discharge malfunction



23If a capacitor-inductor analyzer is not available, a capacitor can be tested with a(n)
A)oscilloscope
B)digital voltmeter
C)analog ohmmeter
D)ammeter



24In the automobile industry capacitors are commonly called
A)condensers
B)mobile caps
C)condensation caps
D)electrolytics



25What is the ability of a dielectric to withstand a potential difference without arcing across the insulator?
A)dielectric strength
B)insulator integrity
C)barrier potential
D)field strength







Grob's Basic ElectronicsOnline Learning Center

Home > Chapter 16 > Practice Test