Site MapHelpFeedbackPractice Test
Practice Test
(See related pages)






1The field effect transistor is a four-terminal device.
A)True
B)False



2The FET is a unipolar device.
A)True
B)False



3Field effect transistors are voltage-controlled devices.
A)True
B)False



4In general, bipolar junction transistors are more temperature stable than JFETs.
A)True
B)False



5The current flow is between the drain and the source terminals in a JFET.
A)True
B)False



6For the p-channel JFET the majority current carriers in the channel are holes.
A)True
B)False



7When a JFET is symmetrical, the drain and source leads may not be interchanged without affecting its operation.
A)True
B)False



8The border between the ohmic region and the current-source region is called saturation.
A)True
B)False



9Whatever method is used to bias a JFET, the gate-source junction is reversed-biased.
A)True
B)False



10One of the most common ways to bias a JFET is with .



11JFETs are used more often than bipolar transistors to amplify small ac signals because JFETs have very input impedance.



12The unit of gm is .



13The current gain of a JFET amplifier is .



14For a common-source amplifier, the output is taken at the .



15For a common-source amplifier, the input and output voltages are degrees out of phase.



16For a common-gate JFET amplifier, the input is applied to the .



17The MOSFET is sometimes referred to as a(n) .



18In which JFET biasing method does the value of ID for a given value of VGS vary from one JFET to the next making it difficult to predict exact values of ID and VD?
A)gate bias
B)self-bias
C)voltage-divider bias
D)current-source bias



19What is the change in drain current divided by the change in gate-source voltage for a fixed value of VDS?
A)conductance
B)ac beta
C)ac alpha
D)transconductance



20What quantity indicates how effective the gate-source voltage is in controlling the drain current?
A)bias
B)voltage gain
C)power factor
D)transconductance



21Which JFET amplifier is similar to the emitter follower used with bipolar transistors?
A)common-source
B)common-drain
C)common-gate
D)gate follower



22Which JFET amplifier has the disadvantage of very low input impedance?
A)common-source
B)common-drain
C)common-gate
D)gate follower



23Which semiconductor device is normally on?
A)depletion-type MOSFET
B)enhancement-type MOSFET
C)bipolar junction transistor
D)zener diode



24An advantage of a MOSFET over a JFET is it
A)is a current-controlled device
B)is less expensive
C)has a higher input resistance
D)has a lower input resistance



25One disadvantage of MOSFET devices is their extreme sensitivity to
A)magnetic fields
B)cold
C)electrostatic discharge
D)heat







Grob's Basic ElectronicsOnline Learning Center

Home > Chapter 30 > Practice Test