Site MapHelpFeedbackPractice Test
Practice Test
(See related pages)






1A series circuit is any circuit that provides one common voltage across all components.
A)True
B)False



2A parallel circuit is formed when one or more components are connected across a voltage source.
A)True
B)False



3A common application of series circuits is typical house wiring to the power line.
A)True
B)False



4In a parallel circuit, the branch with the highest resistance always has the least current.
A)True
B)False



5When a parallel circuit has two branch currents, one branch must equal the difference between the total circuit current and the other branch.
A)True
B)False



6A combination of parallel branches is often called a string.
A)True
B)False



7Adding parallel resistances decreases the total equivalent resistance.
A)True
B)False



8The reciprocal resistance formula is derived from the fact that total current is equal to the current of any one branch.
A)True
B)False



9When there are two parallel resistances and they are not equal, it is usually quicker to calculate the combined resistance by finding their product and dividing that by their sum.
A)True
B)False



10The reciprocal of resistance is .



11The current in an open branch of a parallel circuit is .



12A device which serves to protect the circuit components and wiring in the event of a short circuit is a .



13As more branches are added to a parallel circuit total current .



14The reciprocal of is conductance.



15The base unit of is the siemens.



16A short circuit has practically resistance.



17With power removed from a parallel circuit, an ohmmeter will measure zero ohms across all the branches.



18The combined equivalent resistance of two unequal resistances connected in parallel can be found by
A)the sum divided by product method
B)the product divided by sum method
C)adding resistance values
D)dividing the value of one resistance by two



19In a parallel circuit, total power equals
A)the sum of the individual values of power in each branch
B)the power of any one branch
C)the total resistance times the total voltage
D)the total voltage divided by the total resistance



20What would happen to the branch currents in a parallel circuit if one of the branches became short-circuited?
A)currents would increase slightly
B)currents would be maximum
C)currents would decrease to zero
D)currents would decrease slightly



21With power removed from a shorted parallel circuit, an ohmmeter will measure what across all branches?
A)infinity ohms
B)zero ohms
C)150 ohms
D)1000 ohms



22Any circuit that provides one common voltage across all components is a
A)parallel circuit
B)series circuit
C)a series-parallel circuit
D)short circuit



23An advantage of having only one pair of connecting leads to the source for all the parallel branches is that usually
A)more power is dissipated
B)less power is dissipated
C)more wire is necessary
D)less wire is necessary



24The combined equivalent resistance across the main line in a parallel circuit can be found by using
A)Ohm's law
B)Kirchhoff's law
C)Lenz's rule
D)Fourier's analysis



25Putting more resistance into a parallel circuit
A)lowers the equivalent resistance
B)raises the equivalent resistance
C)increases the applied voltage
D)decreases total power







Grob's Basic ElectronicsOnline Learning Center

Home > Chapter 5 > Practice Test