Site MapHelpFeedbackQuizzes
Quizzes
(See related pages)

1
Which of the following statements about wired and wireless LANs is correct?
A)Both operate in the lower two layers of the TCP/IP protocol suite.
B)Wired LANs operate in the lower two layers and wireless LANs operate in the lower three layers of the TCP/IP protocol suite.
C)Wired LANs operate in the lower three layers and wireless LANs operate in the lower two layers of the TCP/IP protocol suite.
D)Both operate in the lower three layers of the TCP/IP protocol suite.
2
IEEE has defined the specifications for a wireless LAN, called _______, which covers the physical and data-link layers.
A)IEEE 802.3
B)IEEE 802.5
C)IEEE 802.11
D)IEEE 802.2
3
The CSMA/CD algorithm does not work in wireless LAN because
A)wireless host does not have enough power to work in a duplex mode.
B)of the hidden station problem.
C)signal fading could prevent a station at one end from hearing a collision at the other end.
D)all of the choices are correct.
4
In IEEE 802.11, a ___ is made of stationary or mobile wireless stations and an optional central base station, known as the access point (AP).
A)ESS
B)BSS
C)CSS
D)None of the choices are correct
5
In IEEE 802.11, a BSS without an AP is called _________.
A)an ad hoc architecture
B)an infrastructure network
C)either an ad hoc architecture or an infrastructure network
D)None of the choices are correct
6
In IEEE 802.11, a BSS with an AP is sometimes referred to as ____________.
A)an ad hoc architecture
B)an infrastructure network
C)either an ad hoc architecture or an infrastructure network
D)None of the choices are correct
7
In IEEE 802.11, communication between two stations in two different BSSs usually occurs via two ________.
A)BSSs
B)ESSs
C)APs
D)None of the choices are correct
8
In IEEE 802.11, a station with ________ mobility is either stationary (not moving) or moving only inside a BSS.
A)no-transition
B)BSS-transition
C)ESS-transition
D)None of the choices are correct
9
In IEEE 802.11, a station with ________mobility can move from one BSS to another, but the movement is confined inside one ESS.
A)no-transition
B)BSS-transition
C)ESS-transition
D)None of the choices are correct
10
In IEEE 802.11, a station with ________ mobility can move from one ESS to another.
A)no-transition
B)BSS-transition
C)ESS-transition
D)None of the choices are correct
11
In IEEE 802.11, distributed coordination function (DCF) uses _______ as the access method.
A)CSMA/CA
B)CSMA/CD
C)ALOHA
D)None of the choices are correct
12
In IEEE 802.11, when a frame is going from one station in a BSS to another station in the same BSS, the address flag is _____.
A)00
B)01
C)10
D)11
13
In IEEE 802.11, when a frame is coming from an AP and going to a station, the address flag is _______.
A)00
B)01
C)10
D)11
14
In IEEE 802.11, when a frame is going from a station to an AP, the address flag is _____.
A)00
B)01
C)10
D)11
15
In IEEE 802.11, when a frame is going from one AP to another AP in a wireless distribution system, the address flag is _____.
A)00
B)01
C)10
D)11
16
In IEEE 802.11, the access method used in the PCF sublayer is ______.
A)contention
B)controlled
C)polling
D)None of the choices are correct
17
In IEEE 802.11, the ______ is a time period used for collision avoidance.
A)NAV
B)BSS
C)ESS
D)None of the choices are correct
18
In IEEE 802.11, the addressing mechanism can include up to ______addresses.
A)four
B)five
C)six
D)None of the choices are correct
19
The original IEEE 802.11 uses _________.
A)FHSS
B)DSSS
C)OFDM
D)either FHSS or DSSS
20
The IEEE 802.11a uses _________.
A)FHSS
B)DSSS
C)OFDM
D)either FHSS or DSSS
21
The IEEE 802.11b uses _________.
A)FHSS
B)DSSS
C)OFDM
D)either FHSS or DSSS
22
The IEEE 802.11g uses _________.
A)FHSS
B)DSSS
C)OFDM
D)either FHSS or DSSS
23
The IEEE 802.11 FHSS uses ______ modulation.
A)ASK
B)FSK
C)PSK
D)None of the choices are correct
24
The IEEE 802.11 or IEEE 802.11b DSSS uses ______ modulation.
A)ASK
B)FSK
C)PSK
D)None of the choices are correct
25
The IEEE 802.11a, IEEE 802.11g, or IEEE 802.11n OFDM uses ______ modulation.
A)ASK
B)FSK
C)PSK
D)None of the choices are correct
26
Bluetooth is a _______ technology that connects devices (called gadgets) in a small area.
A)wired LAN
B)wireless LAN
C)VLAN
D)None of the choices are correct
27
In Bluetooth, multiple ________ form a network called a _________.
A)scatternet; piconets
B)piconets: scatternet
C)piconets: bluenet
D)bluenet; scatternet
28
A Bluetooth network consists of _____ primary device(s) and up to ____ secondary devices.
A)one; five
B)five; three
C)two; six
D)one; seven
29
In Bluetooth, the current data rate is ____Mbps.
A)2
B)5
C)11
D)None of the choices are correct
30
The access method in Bluetooth is ________.
A)FDMA
B)TDD-TDMA
C)CDMA
D)None of the choices are correct
31
In Bluetooth, the _____ link is used when data integrity is more important than avoiding latency.
A)SCO
B)ACL
C)ACO
D)SCL
32
Bluetooth uses ______ in the physical layer to avoid interference from other devices or other networks.
A)DSSS
B)FHSS
C)FDMA
D)None of the choices are correct







Data Comm. and NetworkingOnline Learning Center

Home > Chapter 15 > Quizzes