Tolerancing 2. Using the image below, determine the limit dimensions between the shoulder screw and bushing and between the bushing and the housing using the specified fit tolerancing tables found in the back of your textbook. Enter the data in the blanks below formatted as n.nnnn. For this exercise use 0.7500 as the Nominal Bushing O.D. and Housing I.D. size and 0.5000 as the Nominal Screw Shaft O.D. and Bushing I.D. size.<a onClick="window.open('/olcweb/cgi/pluginpop.cgi?it=gif::Visualization 15.8::/sites/dl/free/0073128376/48671/viz15_8.gif','popWin', 'width=650,height=202,resizable,scrollbars');" href="#"><img valign="absmiddle" height="16" width="16" border="0" src="/olcweb/styles/shared/linkicons/image.gif">Visualization 15.8 (4.0K)</a>Visualization 15.8

Screw to Bushing RC4 fit.

1		Hole Upper limit = inch.

Screw to Bushing RC4 fit.

2		Hole Lower limit = inch.

Screw to Bushing RC4 fit.

3		Shaft Upper limit = inch.

Screw to Bushing RC4 fit.

4		Shaft Lower limit = inch.

Screw to Bushing RC4 fit.

5		Tightest fit = inch.

Screw to Bushing RC4 fit.

6		Loosest fit = inch.

Bushing to Housing FN4 fit.

7		Hole Upper limit = inch.

Bushing to Housing FN4 fit.

8		Hole Lower limit = inch.

Bushing to Housing FN4 fit.

9		Shaft Upper limit = inch.

Bushing to Housing FN4 fit.

10		Shaft Lower limit = inch.

Bushing to Housing FN4 fit.

11		Tightest fit = inch.

Bushing to Housing FN4 fit.

12		Loosest fit = inch.